Setup your Bluetooth Proxy
When you first power on the device it’s Led will be solid Red, this just means it is not connected to your Wi-Fi, once it is the Led will be off.
Step 1: Connect to Wi-Fi
To do this choose from one of these options:
Setup using Bluetooth (for Home Assistant users with a Bluetooth proxy)
Step 2: Add to Home Assistant (optional)
If you missed it in the previous guides, you can add the device so it appears in Home Assistant by following this guide.
Step 3: Configure the device (optional)
If you want to change any of the default settings on the device you need to adopt it in Home Assistant first.
After adoption you can then Configure the device to suit your requirements, we have some examples here.